ONE K E-MOTION 23 (658-XXX)

Download the Manual

Click here to download the Manual in PDF format. Available in all languages.

Safety

For 14 years old and above. 100kg max.

1 - SAFE USE OF THE ELECTRIC SCOOTER

This appliance can be used by users aged from 14 years and above. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Never use the product close to a water source. Stop using the product when damaged. Never use the product out of the spaces authorized by the regulations.

2 - TECHNICAL SPECIFICATION

Model No	ONE K E-MOTION 23 (658-XXX)
Material	Alloy Aluminium
Folded Dimension	107 x 43 x 44 cm
Unfolded Dimension	107 x 43 x 117.7 cm
Weight	13.9 kg
User height / Maximum weight	1.55m - 2m / 100kg
Maximum Speed	6/15/25km/h
Maximum range per charge	~15-20 KM*
Operating temperature	0°C - 40°C
Motor Power	350W
Front Wheel Size	8.5" (21.59 cm)
Rear Wheel Size	8.5" (21.59 cm)
Battery Capacity (Ah)	6.4 Ah
Battery voltage	36V (End-of-discharge voltage: 27.5V - Upper limit of the charging voltage: 42V)
Charger	AC input 100-240v 50/60HZ, 2.5 A
DC output	42V 2 A
Charging time	+/- 3 Hours
Sealing around compartment	IPX4

• The materials used for the construction of the machine, are not toxic, and have been analyzed according to the following directive: 2011/65 / EU Rohs. A safety data sheet has also been established for the battery.
• The safety and reliability of the control systems have been evaluated according to the following guidelines: 2014/30 / EU Electromagnetic Compatibility Directive and 2014/35 / EU LowVoltage Directive.

3 - CONTROL FUNCTIONS

On/Off function Long press the power button to turn on/off the power. The scooter will automatically turn off after 10 minutes if it is not activated.

Acceleration Press the right acceleration button to start and accelerate. Kick start to activate the motor. Once the speed of the scooter reaches 3km/h, the motor will be engaged to run.

Braking Press the brake lever on the left side of the handlebar to engage the rear wheel disc brake.The action of the brake lever will simultaneously engage the electromagnetic motor brake of the front wheel. The rear brake will not disengage the motor.The rear fender is to only be used as a rear brake if the scooter is used in a non-mo- torised scooter mode.

Setting the speeds Short press the function key to directly adjust the speed.

1. Pedestrian mode: the symbol "D" is not visible on the screen (Max. speed: 6 km/h) The distinctive warning light under the taillight will light up only in this mode.
2. Normal mode: the "D" symbol is displayed in white on the screen (Max. speed: 15 km/h)
3. Sports mode: the "D" symbol is displayed in red on the screen (Max. speed: 25 km/h)

Headlights Press the function button twice shortly to turn the front and rear lights. The taillights have a brake light function and engage with each action of the brake located on the handlebar (even when the headlights are not on).To turn off the headlights, press the function button twice again. Warning. If the electric scooter is overheated (temperature 80° C) the temperature warning light comes on and an audible signal sounds (this can happen during excessive use).You must then stop using the electric scooter and wait for the alarm to go off and the audible signal.You can either leave the scooter on to wait for the end of the signal or put the scooter on OFF and then turn it on again after a few minutes.

4 - TIPS FOR USE/CAUTION

Before and after using your appliance: check all the connections: the brake, the steering column quick-locking system and the wheel axles must be correctly adjusted and undamaged. Also check wheel wear.

Check the height of the steering system and make sure that the nuts are tightened and the handlebars and front wheel are perpendicular. Also eliminate any sharp edges caused by use. Check that the kick stand is fully folded before starting.When parking check that the kickstand is properly unfolded, the unit must be parked on a flat ground to avoid any risk of falling. If the unit is not equipped with a kickstand, ground parking is recommended, making sure you do not interfere with the traffic.

1. If the scooter battery is low or discharged, the appliance can be used as a standard scooter.To do so, switch off the scooter by pressing the OFF button.Then stand on the scooter with your hands on each handlebar and push with one foot to make it move forward. Proceed with caution to start with.

2. A mechanical foot brake is located at the rear of the scooter.When necessary, press it to slow down. Press gradually to avoid skidding or loss of stability.The composite brake may be hot after repeated braking. Avoid touching it during and after use.

• Wet weather impairs traction and braking. Braking distances are increased in rainy weather or when wheels are wet.

• Warning. Any load attached to the handlebars will affect the stability of the vehicle.

• When you use your electric scooter, ensure your position is always correct and respect the Highway Code.

• Do not press the throttle button or the brakes suddenly. Always speed up and slow down gradually.

• The scooter is for teenagers and adults only. It is not a toy. It is a means of transport and not designed for extreme sports such as jumps, ramps, ollies, etc. Under no circumstances must the product be used in a skatepark for “aggressive” use (figures, etc.).

• Check local laws concerning the use of scooters. Respect all the traffic rules and road signs. Keep away from pedestrians or users on the public highway.

• Avoid high traffic areas or overcrowded areas. Cross the protected passages while walking.

• In any case, anticipate your trajectory and your speed while respecting the code of the road, the code of the sidewalk and the most vulnerable.

• In all cases, take care of yourself and others. Notify your presence when approaching a pedestrian or cyclist when you are not seen or heard.

• In France this product is equipped to circulate on certain public roads, for the users of at least 12 years old. Consult the website service.pulic.fr/particuliers/vosdroits/F308.

• In France, it is the responsibility of users of a motorized mobility device (EDP) to insure. Motorized EDPs may be included in home multi-risk insurance contracts but with a specific civil liability clause of the land motor vehicles (VTM) type, or be the subject of a specific EDP motorized contract.

• Preferably use on flat, clean surfaces free from gravel or grease. Avoid bumps and drain gratings likely to cause an accident. Do not use near swimming pools, on or near steps.

• Traffic in the city has many obstacles to cross such as curbs or steps. It is recommended to avoid obstacle jumps. It is important to anticipate and adapt your trajectory and speed to those of a pedestrian before crossing these obstacles. It is also recommended to get out of the vehicle when these obstacles become dangerous due to their shape, height or slippage.

• Take the time to learn the basics of the practice to avoid any serious accident that can take place in the first months. You can get closer to your seller so he can refer you to an appropriate training organization.

• Do not divert the use of the vehicle.

• WARNING! Keep plastic covering away from children to avoid suffocation.

• The average A-weighted emission sound pressure level exceeds 70 dB(A).

• Vibration and shock: Using electric scooters can generate significant vibrations and shocks depending on surface on which it is used. Do not use your scooter for too long, and immediately stop using if discomfort is caused by vibrations.

• Shoes must be worn and we strongly advise you to wear trousers and long-sleeved shirts to avoid injury if you fall.

• Caution! Wear personal protection equipment including: wrist guards, gloves, knee and elbow protectors and a helmet (Keep your helmet chin strap securely buckled).

• Do not use in the dark if the front light is turned off or not bright enough.

• It is highly recommended to wear reflective clothing and accessories to enhance/increase its visibility.

• The electric scooter is not designed for acrobatics. Do not attempt to jump or execute dangerous manoeuvres.

• Do not ride more than one person on the scooter.

• You are advised not to leave the electric scooter outside in damp or wet conditions.

• Do not touch the hub motor located in the front wheel and the brake disc when in use or immediately after riding/braking.

• To avoid pinching and entrapment, don’t get your fingers stick in moving parts.

• When not in use, the scooter must be locked with U-shaped padlock to prevent unauthorized use of commands/product.

5 - UNFOLD THE SCOOTER

1. Pull the steering column up while pressing down the rear wheel fender.

2. Fully unfold the steering column, close the safety latch, then the spring-loaded button will automatically engage when locked.

3. Fix the brake lever with hex wrench (M5 supplied).

4. Tighten the handles onto the handlebars (pay attention to the direction of rotation when tightening).

5. Depending on the vibration experienced by the steering column, correctly adjust the screw of the safety latch

6 - FOLDING THE SCOOTER

1. Lift-up the spring-loaded button located at the base of the column.

2. Pull down the safety latch while keeping the spring-loaded button up.

3. Lower the steering column.

4. Align the hook with the hole in the rear fender and press down to lock the scooter in the folded position. Your electric scooter is now ready to be stored or transported. Be careful when folding and unfolding to not pinch your fingers.

7 - BATTERY DISASSEMBLE AND ASSEMBLE INSTRUCTION

Disassemble

1. Press the dashboard cover lock to open it, then pull it up.

2. Unscrew the battery cover. Tip: Lightly press the cover and turn.

3. Pull the battery straight up to remove the battery. Then tighten the battery cover.

Assemble

1. Open the dashboard cover and battery cover. Tip: Lightly press the cover and turn.

2. Align the groove of the battery with the groove of the column and gently place the battery inside (please pay attention to the direction of the groove).

3. Tighten the battery cover and push the dashboard cover lock down.

Warning!

To properly tighten the cover, make sure that the strap of the battery does not block the mechanism.

Before repositioning the battery in its housing, be sure to replace the protective cap of the charging port located under the battery to avoid faulty contact (see the loading scheme of Option 2).

8 – CHARGING

Your electric scooter is delivered with a specific charger. It is also equipped with two loading ports:

• 1 loading port located at the base of the steering column.
• 1 charging port located at the base of the battery (removable battery). Both of these charging options meet a practical need and allow battery charging in all circumstances. Only charge the scooter or battery independently indoors

Option 1: Charging the battery directly on the scooter

1. To charge your electric scooter, remove the waterproof cap from the port on the back of the scooter's steering column and plug in the charger. For safety reasons, ensure the charging port is always dry before starting to charge.
2. Plug the charger into a suitable power source.
3. When LED on the charger is red, the battery is charging.
4. When it switches to green, charging is complete or disconnected.This takes approximately 3 hours. Stop charging when the diode turns green; charging the battery for too long will reduce its lifetime.

• Children shall not play the appliance.
• Cleaning and user maintenance should not be made by children without supervision. -The charger is specific for lithium battery pack 36V and 6.4 AH ( Model No.: X7BDH). -The battery charger has LED indicator: GREEN light indicates the battery is fully charged or disconnected; RED light indicates the battery is in charging.
• Do not recharge non-rechargeable batteries. It may cause explosion. -The protective cover is used to protect the charging port from splashing water. Be sure to replace the cap after each charging and before each use.
• Only use the charger supplied with your electric scooter. Using a charger other than that supplied will invalidate the warranty.
• To optimise the performances and lifetime of your electric scooter battery, fully charge the battery before using it for the first time and fully charge it once a month.
• Do not cover the battery compartment or the charger.There must be good ventilation conditions at all times during charging.
• The charging environment must be clean. Ensure there are no traces of damp or water in the electric socket before plugging in.
• Ensure you use a standard socket.
• Do not switch on the electronic controller during charging.

Option 2: Charging the battery independently

Remove your battery carefully as explained above (paragraph 7). Plug the charger into the port at the bottom of the batteryThen follow the same instructions as in option 1 (above).

Warning!

Do not use the battery or the device in the following cases:

1. The battery gives off a smell or the temperature inside the appliance is too high.

2. Leaks on the deck of the scooter.

If in doubt please contact your dealer immediately.

Important:

• The battery must only be removed and changed by your dealer. No attempt should be made to dismantle the product and repair it yourself. Any attempt to do so will invalidate the warranty.
• In case of battery leakage, do not touch it. -Keep children away from the battery if it is leaking or displays any other problems.
• Batteries contain dangerous substances. Do not attempt to open the battery or to insert any solid or liquid substance into the battery or into the body of the appliance.
• Only Globber is authorised to repair the appliance.
• Using the battery is subject to authorisation by the local authorities.

9 - MAINTENANCE

Unplug the power and turn off the product before servicing. Monthly maintenance and inspection of the product is required.

Warning. As with any mechanical component, your vehicle product is subject to high stresses and wear.The various materials and components may react differently to wear or fatigue, despite the evaluation of the resistance and fatigue tests of the product according to EN14619.

If the expected service life for a component has bee exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and should be replaced.

Caution: the front wheel has a motorised part which can only be dismantled or changed by a qualified technician.

Do not change any motorised parts yourself or the warranty will be invalidated.

Contact your dealer for a qualified technician or contact Globber, [email protected].

Replacement of spare parts must be done with original parts to avoid any impact on the health and safety of the user.

The lithium battery: To guarantee the battery lifetime, charge it appropriately when its level is low. If it is not used after long of time, you are advised to charge it once a month. If you wish to check the battery or change it, contact a qualified technician or a Globber representative.

Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear brake.

Or the warranty will be invalidated.

The accessories and any additional items which are not approved by the manufacturer shall not be used.

To clean: Disconnect the charger and turn off product, wipe it with a dry cloth. The recommended storage temperature for the battery is between 5°C and 30°C.

Do not use or place the electric scooter in an environment where the temperature exceeds 40°C to avoid any lithium battery malfunction which may lead to it catching fire.

Never store the electric scooter in a car during hot weather to avoid any danger of this.

Bearings: avoid riding through water, oil or sand which would damage your bearings.To maintain your bearings, check regularly that the rear wheel turns properly by turning the electric scooter upside down and pushing the wheel with your fingers. If the rear wheel does not turn, remove it and check the condition of the bearings. First unscrew the wheel axle.

Remove the axle and remove the wheel. Carefully push the two bearings out of their seating. If they are chipped or crushed, buy new ones. If there is no visible damage, oil them.To do so, remove any traces of grease, mud or dust from the bearing using a paper towel or a cloth then grease them either with a self-lubricating spray or by soaking them in oil overnight (turn the bearings several times in the oil before leaving them to soak). Refit the bearings and axle, then the rear wheel.

The wheels: the wheels wear out after a certain length of time or may even develop holes if the scooter is used on rough sur- faces too much.This is particularly true of the rear wheel on which the brake is applied. Check them regularly, check monthly, and have them changed for better safety.

Product modifications: under no circumstances may the original product be modified apart from the maintenance stated in these instructions.

Nuts, axles and other self-locking fasteners: check them regularly, check monthly.They may become loose over time. If they do, tighten them up.They may also become less effective. In this case, replace them with new ones.

For questions and inquiries please contact us through the contact form.

10 - DISPOSAL OF END-OF-LIFE APPLIANCE

• The appliance must be disconnected from the mains supply when removing the battery.
• The battery must be removed from the appliance before the appliance is discarded.
• The battery must be disposed of safely by taking it to the most suitable collection point

11 - WARRANTY

The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.

This limited warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
• modified in any way;
• rented

The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.

Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.

E-scooter batteries are covered by a 1-year warranty from the date of purchase.

For your records, save your original sales receipt with this manual and write the product name below.

10 – TROUBLESHOOTING

Problem	Possible cause	Solution
Scooter will not run	Battery is not charged	Fully charge the battery. The first charge takes approximately 4 hours and up to 3 hours for recharges.
	Wires or connectors are loose or unplugged	Check to ensure that the charger is securely plugged into both the wall socket and the scooter.
Scooter run-time is short	The battery does not charge completely.	Fully charge the battery. The first charge takes approximately 4 hours and up to 3 hours for recharges. Check to ensure that the charger is securely plugged into both the wall socket and the scooter. Make sure that the wall socket is connected to the mains power.
Battery will not charge fully	1. You have been using your scooter for a while. The battery has certainly lost its capacity.	The average rechargeable battery life is 1 to 2 years depending on scooter conditions and use, the maintenance (at least one charging per month) and storage (dry place at temperature between 5 and 30 degrees). In both cases (1 and 2), the battery needs to be changed, please contact your dealer.
	2. Your scooter is new and has low autonomy.
Scooter suddenly stops working	Excessive use of scooters - Excessive overload (a steep incline, or the rider is too heavy) may have caused the motor to overheat and trip the safety.	If such a sudden stop of the scooter occurs, turn off the scooter (put in the OFF position) and wait about a minute before being able to switch on the scooter again.
	Wires or connectors are loose or unplugged	Check all wires and connectors to make sure they are connected and secure.
	Improper use in wet environment which has led to an electronic short cut	The E23 scooter is not designed for wet, rain, or puddle use. If your problem arises as a result of such use, please contact your dealer.
Scooter runs sluggishly	Scooter is overloaded	Be careful not to overload the scooter beyond the maximum weight limit (100 kg). Be careful not to use your scooter on steep slopes, and do not pull or tow objects or people. Avoid overloading the scooter as this will cause premature wear of the battery and its components.
	Unsuitable riding conditions	Ride only on solid, flat, clean, and dry surfaces, such as a bike path or level ground.